Electric winch for sale Philippines

发表于由
回复

The winch is a kind of lifting equipment that uses a winding drum to wrap a wire rope to lift or pull heavy objects. our winch products are widely used in construction, road, and bridge, mining, water & electricity, the terminal, oil, and other industries. Yuantai crane  will follow our consistent commitment to quality, performance, and service of a commitment to customer satisfaction as our highest pursuit.

Electric Winches are motorized pulling machines for moving heavy loads or towing vehicles with less effort than manual winches. Designed for intermittent use, they have a line that attaches to the load and a motor that rotates a drum to wind in the line and draw the load toward the winch.

Here are some tips for you choose right winches:

Safe operating procedures for winch

1. The winch should be installed in a flat and solid place with good visibility. The connection between the fuselage and the ground anchor must be firm. The winch barrel and the center line of the guide pulley should correspond vertically. The distance between the winch and the derrick pulley should generally be no less than 15m.

2. Check the wire ropes, clutches, brakes, safety wheels, body moving pulleys, etc. before winch operation to confirm safe and reliable operation. Check whether there is friction between winch wire rope and the derrick.

3. The wire ropes of winch must be neatly arranged on the drum, and the drum wire rope must be kept at least three times during winch operation. No one is allowed to cross the winch wire rope during operation.

4. When using winch lift heavy objects and need to stay in the air, in addition to using the brakes, gear safety should be used to secure the card.

5. Operators must hold a certificate to work, and it is strictly forbidden to operate winch without a certificate, and it is strictly forbidden to leave the winch during working hours.

6. Obey the signal of the commander during work. If the signal is unknown or may cause an accident, the winch operation should be suspended, and winch operation can be continued after the situation is clarified.

7. If there is a sudden power failure during winch operation, the knife should be opened immediately and the transported objects should be put down.

8. After the operation is completed, the material tray should be grounded and the electric box of winch should be locked.

When we use electric winch for the first time in the construction site, we need to install electric winch. If we are not familiar with it, we can directly let people install electric winch, so that we will be more at ease when using it. Of course, any installation link is very important. Before putting it into use, we must comprehensively check the safety performance of electric winch after installation. The manufacturer of electric winch will explain the fixing and installation of electric winch for you.

How to use winch safely and reasonably while operation?

When using large ton winch, regular maintenance should be carried out to help save costs.

How to operate the 5-30 ton electric winch safely and reasonably is also vital to the safety of employees and property.

1. When operating a large ton low speed winch, attention should be paid to prevent the wire rope from dragging on the ground. In the operation of large ton electric winch, no one is allowed to cross the wire rope. The 5-30 ton electric winch should be placed on the zero position before energizing.

2. The steel wire ropes on the drum of the low speed winch should be arranged in order, and there should be no chaotic layer phenomenon. During the operation of the low speed electric winch, if there is a sudden power failure, the power supply should be blocked immediately and the hanging objects should be safely put down.

3.The extra traction of the low speed winch refers to the maximum static pulling force allowed by the outermost wire rope, At this moment, the rope of the wire rope is the longest, and this value cannot be exceeded during operation, which means no overloaded.

4.After lifting heavy objects, the low speed electric winch should start slowly, and start and lower at full speed. At the same time, it is necessary to prevent emergency braking, which may damage the transmission components and wire rope.

Fixing and installation of electric winch

1. Winch fix

The electric winch must be fixed with ground anchors to prevent slippage or overturning during work. According to the magnitude of the force, the winches have four fixing methods: bolt anchoring, horizontal anchoring, standing pile fix anchoring and weight anchoring.

2. Pay attention to the following points in the installation of electric winches:

(1) There must be unblocked drainage around the installation location of electric winch and a work shed should be set up;

(2) The installation of winch should enable the operator to see clearly the commander and the lifting or dragging object. The horizontal distance from the hoist to the installation position of the component should be greater than the installation height of the component, that is, when the component is hoisted to the installation position, the elevation angle of the operator’s line of sight should be less than 45°;

(3) A guide block should be set directly in front of the hoist when we fixing the winch. The distance from the guide block to the axis of the drum, the grooved drum should not be less than 15 times the drum width, that is, the inclination angle α should not be greater than 2° (Figure 14-19), The gloveless reel should be greater than 20 times the width of the reel to avoid excessive wear of the wire rope and the groove edge of the guide pulley;

(4) The electric winch can be used alone or as a component in machinery such as lifting, road construction and mine hoisting. It is widely used because of its simple operation, large rope winding volume and convenient displacement. Mainly used in construction, water conservancy projects, forestry, mines, docks, etc. for material lifting or flat towing. When you are interested in electric winches, why not come and visit our electric winches manufacturer.

 

Several of Electric Hoists for Sale Philippines

发表于由
回复

Philippines is our important mark for buying electric hoists. Now we will introduce some several of hot products of electric hoist.

Metallurgical Electric Hoists are commonly used in monorail cranes, jib cranes and moving single girder crane, and widely used for Philippines. Because of its simple structure, convenient manufacturing and maintenance, good interchangeability, and easy operation, they are widely used in factories. If its safety devices are incomplete or improperly used, it will cause casualties. Therefore, metallurgical hoist operators must strictly abide by the following operating rules in addition to training with a certificate as required:

Before operation, carefully check whether the equipment’s mechanical, electrical, wire rope, stopper, etc. are in good condition and reliable. Do not lift with overload.

When lifting objects with an electric hoist, be sure to follow the crane safety operation regulations. The strapping should be firm, and the sharp corner of the object should be protected by padding. When using the tow line for power supply, the insulation must be good. Pay attention to the person’s standing position during operation. The monorail metallurgical hoist must decelerate when it is turning or approaching the end of the track.

The most important thing is that the electric hoist must be operated by a dedicated person and strictly abide by the relevant safety operating regulations of the crane.

NR model electric Wire Rope Hoist is a new generation of electric wire rope hoist which adopt modular, light weight, intelligent design concept. Low price, but very adaptable in Philippines. There are four structure designs to choose for customers: NRL low headroom travelling type,NRS standard headroom travelling type, NRT double beam hoist trolley type and NRT fixed type electric hoist. The hoist lifting capacity is from 3 ton-32 ton, and 5 ton European-spec electric hoist is the most widely used tonnage among them. European-spec electric wire rope hoist consists of lifting mechanism, travelling mechanism,electrical control system, etc. European-spec electric wire rope hoist’s product quality conforms to ISO, GB, FEM, DIN, BS, etc standards.

As the most popular and normal lifting mechanism, wire rope hoist has its own advantages and disadvantages, the obviously advantage is the low cost, and it is the priority choice for heavy industries. But nowadays, people all have high standard for working environment, especially the small workshops and warehouses, they need the hoist but they also want to make the workshop and warehouse clean and good-look, then electric Chain Hoist can meet this requirements. Normal electric chain hoists are always the best seller in Yuantai, some clients also asked for ex-proof electric chain hoist in the past, but at that time, Ex-proof electric chain hoist is still under technical study and not approved to sell on the market, until this year, Ex-proof electric chain hoist is approved to sell on the market after long time study and repeat tests by Yuantai technical teams.

Please don’t hesitate to send inquiries. Any questions about hoists, please contact me!

 

How to Choose a High-Quality Overhead Crane?

发表于由
回复

If you want to buy one 5ton to 50 ton overhead crane, first step, you should find a reliable supplier, China supplier is a good choice. Such as Yuantai group, they are specialist in overhead crane industry more than 30 years. Furthermore, they only focus on this filed.

Secondly, it is necessary to check them, what projects have they done for overseas customers. Yuantai group served many customers, over 120 countries and regions; we have done the 150 ton Double Girder Gantry Crane in Pakistan, providing lots of 5ton to 50 ton overhead crane to Bengal, Philippine.

Thirdly you should check what certificates they have, what qualification, whether they already been audited by international third party company? Yuantai group, we have ISO CE SGS, BV etc certificates, we have full confidence to produce all overhead crane, gantry cranes.

Overhead crane daily maintenance

First of all, overhead lifting system: check the smoothness of the oil contact ports, and regularly replace the increased oil to prevent damage to the machine due to lack of lubrication.

Second, the overhead crane electrical system of the bridge crane: check whether the power cords and cables are damaged, whether all key control switches can be used normally, and whether the circuit connection meets the requirements.

Third, the maintenance of the mechanical part of the bridge crane: For each mechanism, whether it is the lifting mechanism, the operating mechanism, check the working condition, check the lifting wire rope and the bolts of the fixed machine to see if it is tight, check the welding The working conditions of seams and components, regular tightening and refreshing paint to ensure that the surface is not corroded.

Fourth, the lubrication work of the bridge crane: the lubrication situation needs to be paid attention to frequently; otherwise it will affect the running-in of the mechanical parts, check the lubrication of all parts of the bridge crane, do a good job of periodic lubrication, and add or replace the grease on time.

Yuantai Crane Continues to Innovate the Function of Jib Crane

发表于由
回复

jib crane Philippines with hoist is small and medium-speed lifting equipment developed recently. It has characteristics of unique structure, safe and reliable operation, high efficiency, energy-saving, time-saving effort-saving, and flexibility. It can be operated under three-dimensional environment. It is superior in the case of short distance concentrated lifting it is widely used at sites for various trades.

Compared with all kinds of cranes, jib crane is a special existence. A jib crane looks like a crane (bird). Actually the jib crane is probably the oldest type of crane since Roman period, people installed pulleys on booms to lift building materials, which is the prototype of modern jib cranes.

Drawing of Jib Crane For Sale 

Last month, Yuantai Crane produced a 5ton jib crane with boom length beyond imagination, total 10 meter; this is almost comparable to the tower crane. But it’s a jib crane. With such a long arm, this jib crane can cover a huge lifting area. Our customer used this jib crane to loading and unloading steel structure from the truck. This completely replaces the previous forklifts and is maintenance-free and easy to operate.

For some working conditions, you might need a Portable Jib Crane which will be more flexible, since you need to move this crane to somewhere to handle something that is not in a fixed location. The portable jib crane has 4 universal wheels and a thick bottom plate which is used as a foundation. However, for many crane manufacturer, they can only design the capacity no more than 1 ton, but this time, we developed a portable jib crane with a capacity 2ton, and the total height and arm length are also larger than those designed by other factories. Our talented engineers, thanks to the balancing principle of tower cranes and crawler cranes, added a counterweight section to the tail of the portable jib crane which easily breaks the 2 ton limit and the arm length limit. At present, this jib is still in production. After the production is completed, Yuantai Crane will provide you with the experimental report. Let’s wait and see!

Questions of Gantry Crane for Sale

发表于由
回复

Safety protection devices for gantry crane

In order to ensure the safety of Single Girder Gantry Crane operations, many users will install safety protection devices on it to protect or remind operators the safety. So what are the safety devices of gantry cranes?Let us have a look together.

  1. Lifting limit device: When the hook of the travelling electric gantry crane rises to the specified height, it will touch the limit weight hammer, then the stroke switch will be turned on, the “overwinding” indicator lamp will be turned on, and the operation of lifting the hook and extending the boom will be cut off to ensure safety.
  2. Leg locking device: In the case of high pressure hose, tubing rupture or cutting to the vertical cylinder of A-frame gantry crane leg, the two-way hydraulic lock in the hydraulic system can block the leg, block the pressure oil two cavities of the cylinder, and keep the leg from shrinking or throwing out to ensure the safety of the outdoor trackless gantry crane
  3. Lifting capacity indicator: mainly to enable operators to clearly point out the elevation angle of the boom and the rated lifting capacity allowed by the crane under the corresponding working conditions to ensure that the double girder Truss Gantry Crane will not be overloaded
  4. Boom telescopic safety device: Usually when the high pressure hose or tubing burst in the boom telescopic cylinder circuit of the gantry crane, the balance valve in the hydraulic circuit will lock the working oil from the lower cavity of the cylinder to make the hook Automatically retract to ensure the safety of heavy lifting gantry crane

How to safely operate the gantry crane?

As the large lifting equipment, the safe operation of gantry cranes plays an important role in the company’s production and personal lives.

Each type of crane has its own safe operation procedures. If you want to operate crane safely, you must master it in advance. The following is a brief introduction of safe operating procedures for gantry cranes.

  1. Before the gantry crane is operated, the brakes, hooks, wire ropes and safety devices of the crane need to be checked. If any abnormal phenomenon is found, it needs to be solved in time.
  2. The operator must confirm that no one is on the platform or track before turning on the main power. When the power circuit breaker is locked or a notice board showed, the main power supply should be removed before turning on. When the gantry crane is operated, it is necessary to perform the bell alarm for various operations in accordance with the regulations, and also need to operate in accordance with the unified command signal.
  3. When the vehicles of gantry cranes are in normal operation, they cannot be braked and stopped. When changing the movement direction of the vehicles, the handle must be at the “zero” position and the mechanism should be completely stopped before driving in the opposite direction.
  4. When the gantry crane suddenly loses power, it is necessary to return all the control handles of the crane to the “zero” position in time, and check whether the gantry crane could be operated normally before restarting.
  5. For gantry cranes with two hooks, if the main and auxiliary hooks are switched and the height of the two hooks is close, the main and auxiliary hooks must be operated separately to avoid collisions.
  6. When lifting heavy objects, the weight should be lowered 0.5 meters above the ground to check the performance of the gantry crane brake, and then perform normal operations after confirming the reliability.

How to reduce the maintenance cost of European standard gantry crane?

When using any mechanical equipment, it must be maintained; otherwise it is likely to shorten its service life, not to mention the special mechanical equipment such as the European standard gantry crane.

In order to ensure the high-efficiency operation of the European standard double-girder crane, it takes a lot of costs to maintain. So how can we reduce the maintenance cost?

  1. Set a fixed inspection and maintenance cycle for the European standard single beam crane.It should be noted that the determination of the inspection and maintenance cycle needs to be determined according to the working conditions and stroke length of the European standard single girder gantry crane.
  2. Correctly understand the maintenance problems of the European standard double girder cranes, and do not try to solve them when problems occur. This will not only increase the maintenance cost of the equipment, but also seriously affect its work efficiency.
  3. Pay attention to the use of oil. Since the use of European standard single beam gantry cranes will inevitably cost a lot of costs in terms of hydraulic oil, lubricating oil and fuel, we suggest that you reduce or reduce the increase in fuel consumption.
  4. To be familiar with the maintenance methods of the European standard double girder crane.Adopt effective methods to deal with various problems in a timely manner to avoid a series of chain reactions caused by failures.

Any questions of gantry cranes, please feel free to let us know.

 

 

How to use and maintain electric hoist

发表于由
回复

electric hoist is a kind of small lifting equipment, which is installed on the overhead crane, gantry crane. It can also be used with I-beams or H-beams. The electric hoist has the characteristics of small volume, light weight, simple operation and convenient use. It is widely used, but there are few professionals who can operate electric hoist correctly. It is suggested that we should know more about electric hoist and make better use of various electric hoist in various fields.

The newly installed electric hoist shall be put into trial operation without load for many times. However, don’t to power on the test run until the installation is complete. Before normal use, 125% of rated load, static load test and dynamic load test shall be conducted to check whether the hoist is normal.

The working environment temperature of electric hoist is – 20 ℃~ + 40 ℃.  It is not suitable for places full of corrosive gas or relative humidity greater than 85%, and can not replace explosion-proof hoist. It is not suitable for lifting molten metal or toxic flammable and explosive materials.

The electric hoist shall not be lifted and unloaded from the side, and overload use is prohibited. In the process of use, the operator should check whether the steel wire rope is disorderly buckled, knotted, dropped groove, worn and other phenomena at any time. If it occurs, it should be eliminated in time, and the rope guide and limit switch should be checked regularly to see if they are safe and reliable. It is not allowed to press two hand switch buttons that make the electric hoist move in the opposite direction at the same time. When the electric hoist is not working, it is not allowed to suspend heavy objects in the air to prevent permanent deformation of parts. After working, turn off the main power switch and cut off its power supply.

Electric hoist is related to safety, so quality selection is very important. In order to give you suitable electric hoist solution promptly, please provide us with your inquiry, including lifting capacity, lifting height, power supply and working environment.

Gantry crane used for shipyard Philippines

发表于由
回复

The shipyard gantry crane can be Single Girder Gantry Crane and Double Girder Gantry Crane. When it comes to large span and lifting weight, we suggest the single girder gantry crane which is more economy.

Main Data of Gantry Crane for Shipyard in Philippines

shipyard gantry crane

1. Lifting weight: 10-200t;

2. Lifting height: 8-12m;

3. Standard span: 5-35m

Specification of Shipyard Gantry Crane

Technical Specification
Lifting capacity t 2×50+100 2×75+100 2×100+160 2×150+200 2×400+400
Two trolleys lifting 150 200 300 500 1000
Section reverse lifting 100 150 200 300 800
Work classifications A5
Span m 50 70 38.5 175 185
Lifting height

(m)

 H1 35 50 28 65/10 76/13
H2 35 50 28 65/10 76/13
Lifting speed

(m/min)

 Full load 0.5~5 0.5~5 0.4~4 0.5~5 0.32~3.2
No load 1~10 1~10 0.8~8 1~10 0.64~6.4
Crane travelling

(m/min)

 Full load 2.5~25 2~20 3~30 1~25 3~30
No load 3.5~35 3~30 4.5~45 1~30 3~40
Trolley travelling

(m/min)

 Full load 2.5~25 2.5~25 3~30 1~25 3~30
No load 2.5~35 2.5~35 3~45 1~30 3~40
Wheel load KN 260 320 330 700 750
Total power KW 400 530 650 1550 1500
Power 3-phase AC 50Hz 10KV

Characteristics of Shipbuilding Gantry Crane:

Single hanging, lifting hanging, air overturning, air unbalanced tiny turn grievances, such as micro-multiple functions.
Upper-crab has double main hooks separately situated at the outer side of the main girder which can separate or simultaneously horizontally move within 0-2m.
Lower crab has main and auxiliary hooks situated below the center of girder.
The two crabs can mutual act in the air.
In order to prevent the attacks of storms, there are reliable wind-shielding devices such as rail clamp, ground anchor.

Our products like jib cranes, gantry crane, overhead cranes are well received in the crane Philippines and Southeast Asian markets. We have been engaged in material handling industry for decades, and have a wealth of experience in designing and manufacturing lifting equipment. We supply a variety of cranes to server almost all needs of customers, including overhead crane, gantry crane, jib crane, hoist and winch products. We have set strict quality control system and assurance system to improve product quality.

To know more about shipyard gantry crane, contact us freely. Our professional sales team and engineers will be very pleased to help you in the whole selection process.

 

Philippines Gantry Crane for Shipbuilding

发表于由
回复

As we all know, the Philippines is located in the western Pacific Ocean and is an archipelagic country in Southeast Asia. Due to its proximity to the sea, the shipbuilding industry is relatively developed. Therefore, gantry cranes play an indispensable role in the development of shipyards.

Shipbuilding gantry crane is highly efficient lifting equipment designed to improve productivity of dockyards. It is capable of lifting and moving large blocks of hulls in the process of ship building or repairing. The shipyard gantry cranes fall in two main configurations including single girder and double girder. With regard to different running mechanisms, it can be divided into rail mounted and rubber tired type. The shipbuilding gantry crane has numerous advantages such as superior quality, high rigidity, excellent safety and great flexibility, which is very popular in the Philippine market.

Different Types of Gantry Cranes Sale For Philippines

Yuantai Crane supplies a large variety of shipyard gantry cranes to meet different lifting applications of clients. Here we strongly recommend two main types of gantry cranes widely applied in Philippines shipyard.

Rail mounted gantry crane for shipbuilding 
Rail mounted crane is the most common type of lifting equipment used in shipyard. The rail mounted shipyard gantry crane travels on tracks mounted on the ground and is able to handle various materials. The gantry lifting equipment can be built with outreach at both sides of main beam to form cantilevers, which can greatly increase the work space of the crane.

Rail mounted gantry crane for shipyard normally adopts Remote Control or cab operation to ensure the safety of operators. It has many prominent features such as wide adaptability, high utilization, high productivity and durable performance.

Rubber Tyred Gantry Crane
The rubber tired gantry crane is an ideal lifting solution to improve the flexibility and mobility in your shipyards. Instead of running on rails, this type of dockyard gantry crane is attached to rubber tires at the bottom so that it can moves anywhere within the working areas freely. The mobile gantry crane can lift with a variety of capacities to cover the most applications of customers.

The portable shipyard gantry crane provides an easy transportation, wide lifting coverage, flexible movement and simple operation, making it a popular option for many crane users.

Features of Shipyard Gantry Crane for Sale to Philippines

Reasonable structure for less costing and maintenance. The shipyard gantry cranes are designed by professional engineers and made by skilled workers.


At last, the credible electric parts are able to guarantee the crane safety when operating the shipyard gantry cranes.

All in all, a range of gantry cranes have a lot of features and advantages that can meet the needs of your business well. Customers can choose the most proper shipbuilding gantry crane from our factory. If you are interested in the gantry crane machine, please feel free to keep in touch with us and you will receive the most proper gantry crane cost as soon as possible.

 

 

Gantry crane for Mining Industry Philippines

发表于由
回复

gantry crane for sale is available with a variety of types and sizes, from full gantry crane, capable of lifting extremely heavy loads, to small Portable Gantry Crane, used in shops, garages, workstations to lift small objects usually less than 10 tons.

Gantry crane for sale philippines

Gantry cranes are mostly used for loading and unloading operations in outdoor freight yards, mining, ports and railways. The Philippines is rich in mining resources. The crane has the characteristics of high site utilization, large operating range, wide adaptability and strong versatility. Therefore, the gantry crane is very popular in the Philippines.

Gantry Crane for Mining Industry

Heavy-duty process gantry cranes used in the mining industry need to be able to carry heavy and dangerous loads, and they must also be protected from heat, dust, moisture and corrosion from constant use. Yuantai has a range of cranes that can withstand the harshest environments.

Features of Gantry Crane Sale for Philippines

Parameters

 single girder gantry

Lifting Capacity

 3t-25t

Lifting Height

5m-30m

Span

5m-30m

Cantilever Length

0-1/3 span

Control Method

Remote Control, pendent, cabin

Speed

Designed
Other Components

Motor, Reducer, Wheel, Rail sweeper, Rail clamp, Brake, etc.
 Ambient Temperature

-25℃~+40℃
Electric Protection Systems

Short circuit protection, Voltage-loss protection, Emergency power switch, Overload limiter, Position limiter, Zero position and interlock protection, Three-phase fault & voltage fault protection, Ground protection, etc.

Item

Portable Gantry Crane

Capacity

 0.5 1 2 3 5 10

Span

2-12m (as your require)
Height

1-10m (as your require)

Wheel

4

Lifting equipment

Manual / Electric Chain Hoist or Wire Rope Hoist
Power

380V50HZ3P or customized

After-sales Service

We have a professional after-sales service team to meet customers’ installation, commissioning, user training, technical consulting and other service needs, and there are dedicated personnel responsible for customer return visits after service. We provide life-long service support.

  • We send after-sales service engineers to help equipment installation and commissioning.
  • We provide training for operators and maintenance personnel, and provide free technical consulting services.
  • We provide lifetime service for equipment.
  • We provide original, authentic and high quality spare parts for equipment maintenance.
  • Our service is provided 7*24 hours per week.

We will always follow our service concept that customer satisfaction is our success, and make the full satisfaction of customers as our top priority.

contact us For A Quote

If you want to get the price of the gantry crane you need, please feel free to contact us. Fill our the contact form or send us an email to let us know more information of the crane, including:

  • The type of gantry crane you need
  • Maximum rated load
  • Span
  • Lifting height
  • What type of load does it lift?
  • Crane working environment
  • How many hours does the crane work per day?
  • And more

We will assist you in choosing the right crane system and provide you with the most competitive prices.

10 ton overhead crane for sale Philippines

发表于由
回复

2 sets of 10 ton Single Girder Overhead Cranes were successfully installed in our Philippines customer’s workshop.

This time, our customer purchased 2 single-girder cranes for mining. Mining is the mainstream industry in the Philippines. According to customers’ needs, we design and manufacture the perfect overhead bridge crane to accommodate customer’s workshop, and also provide extensive after-sales service, including the crane installation and commissioning, staff training service, free technical consultation, 12-month warranty, etc.

Application for Single Girder overhead crane Philippines

Overhead crane mainly helps us lift heavy loads, which can meet 1-500 ton materials handling needs, with the development of the economy; overhead crane has become more and more popular in the Philippines. Almost all kinds of heavy industries need to install overhead bridge cranes for finishing the production. For example, Machinery production workshop, steel handling workshop, automobile industry, food processing, steel production, paper mill, electromagnetic board factory, casting industry, etc.

Customer Single girder overhead Crane Design

Drawing of Single girder overhead Crane

Pictures of Single Girder Overhead Crane Philippines

Single Girder Overhead Crane Philippines

If you need a overhead crane, please feel free to contact us.