Philippines Manual Chain hoist For Sale

发表于由
回复

The manual Chain Hoist is also called chain hoist, chain hoist, heavy duty, manual hoist. It is a simple to use and easy to carry manual hoist, also known as “chain hoist” .

It is suitable for short-distance lifting of small equipment and goods. The lifting weight generally no more than 10T, and the maximum can reach 20T. The lifting height generally less than 6m. The outer shell of the chain hoist is made of high-quality alloy steel, which is strong and wear-resistant and has high safety performance. When the chain hoist lifts a heavy object, pull the hand chain and hand chain wheel clockwise to rotate, and pull the hand zipper bar counterclockwise when descending. The brake seat is separated from the brake pad. The ratchet wheel is stationary under the action of the pawl. The five-tooth long shaft Drive the hoisting sprocket to run in the opposite direction, so as to lower the weight smoothly. The chain hoist generally uses a ratchet friction plate one-way brake, which can brake automatically under load, and the pawl meshes with the ratchet wheel under the action of the spring to make the brake work safely.
It has the characteristics of safety and reliability, easy maintenance, high mechanical efficiency, small pull force of the bracelet, light weight, easy to carry, beautiful appearance, small size, and durability. It is suitable for factories, mines, construction sites, docks, docks, warehouses, etc. Installing machines and lifting goods, especially for open-air and no power operations, shows its superiority.
The main parts of the chain hoist are made of alloy steel. The chain adopts 800Mpa high-strength lifting chain. The material is generally 20M2. The chain is medium-frequency quenching heat treatment, low wear and corrosion resistance; high-strength hook, the material is generally alloy steel, forged The striking hook design ensures slow lifting to prevent overload; it complies with European CE safety standards

How to install the manual hoist?

Inspection and preparation before installation:
1. After the electric hoist is transported to the installation site, accept it according to the packing list, and carefully check whether there is any damage or missing parts during the transportation process
2. Remove oil stains or anti-rust paint on the wheel treads of the operating mechanism;
3. Understand the installation site.
Prepare to install facilities:

The electric hoist running track is I-steel, and the wheel tread is conical. The track model must be within the recommended range, otherwise it cannot be installed. Please check carefully before installation. When the running track is H-shaped steel, the wheel tread is cylindrical. Please check carefully before installation. During installation, loosen the locking nuts of the connecting bolts between the running mechanism wall panels to separate the left and right wall panels of the electric hoist.
Install the appropriate number of adjusting pieces on the connecting bolts on the inner side of the wallboard wheels, the left and right numbers are equal, to ensure that there is a gap of 3-5mm between the wheel flange and the rail flange, and the extra adjusting pieces are placed on the outside of the wallboard, and then the suspension trolley The electric hoist is installed on the track and the nut is tightened. The degree of tightening is based on the fact that the wheels on both sides of the I-beam or H-beam do not tilt outwards. The suspension trolley-type electric hoist adopts four wall panels.

In order to ensure that the four wheels touch the ground at the same time, the wall panels must be swung during installation to ensure that the four wheels touch the ground at the same time and tighten the nuts. The degree of tightening is based on the fact that the wheels on both sides of the I-beam or H-beam are not tilted outward as the standard. At the same time, knock in the wall plate pivot and tighten the lock nut. 2.2 Electrical installation The electrical wiring personnel must hold an electrical work certificate to perform external wiring according to the use of the electric hoist or the matching situation of the hoist while ensuring that the power supply is disconnected.
2. Installation precautions: In order to ensure that the electric hoist does not derail when running to the two ends of the track or to prevent collision and damage to the body, elastic buffers should be set at both ends of the track;
When installing the electric hoist, check whether the plug used to fix the wire rope is loose. A grounding wire should be set on the track or its connected frame. The grounding wire can be a bare copper wire of φ4～φ5mm or a metal wire with a cross-section of not less than 25mm2. The ground resistance of all power circuits and control circuits of electrical installations shall not be less than 10000Ω per volt of working voltage.

Workshop Cranes

发表于由
回复

Generally, when you build a workshop, you must consider the space for cranes, no matter the workshop is made of concrete columns or steel structures; if it is a new constructed concrete workshop, brackets are easily to be ignored, which lead to the troubles for future crane installation; if it is an old warehouse, it should be rebuilt with steel columns and runway beams and make foundations.

Runway beam, also called bearing rail beam(H beam), it is above brackets for supporting crane rails. Most clients do not very clear which part are the necessary for crane installation, below real picture will help you understand better:

Therefore, if you want to install a crane, you should consider the support parts(steel columns, brackets, H beam and cranes, power lines). A complete set crane includes main girder, end carriages with driving engines, crane wheels, electric control box, electric hoist and necessary small components.

Lifting height is the hook path from the ground, the hoist body height will take up some space. Except the lifting height, the safe distance from crane upper lever to roof should be considered into mind. If you want to achieve a desired lifting height, crane body dimension, hoist body height, safe distance mentioned above, all these should be considered in advance.

For some existing workshop, lifting height is always what they worry.

Actually, there are several ways to improve the lifting height and send to you a desired crane.

1.    For Single Girder Overhead Crane, Low Headroom Electric Hoist and max. make full use of the space, and  the girder on which it mounted is box girder type.

Below is the crane photo

2.    LDP model single girder overhead crane, this kind of crane is different from the design of hoist, the hoist is on the above of girder, which max. improve the effective lifting height.

3.    European Single Girder Overhead Crane has its own advantages, box girder, compact structure, advanced engines. The hoist is low headroom type.

4.    Another solution to improve the lifting height is to install double girder overhead crane with crab hoist, the hoist is like a crab above the girders.

 

Workshop stationary jib crane and portable jib crane for Sale

发表于由
回复

Workshop Stationary & Portable Jib Cranes &Mobile jib cranes for Sale

A Jib crane is a small lifting equipment generally installed in a workshop and warehouse, the working range of the jib crane is limited but it has a very obvious advantage during production, it can rotate motorized and manually from 180 degrees to 360 degrees, and the working area is a circle. Due to its small body, taking up little space and easy installation and operation, the jib crane is popular with clients. As for the jib crane, the most important is to make the foundation, Yuantai will provide the foundation drawing and the detailed procedure of making the foundation to clients, according to the drawing and procedure, the foundation is not a problem. There is another type of jib crane which doesn’t need to make foundations, but it has the same function as the jib crane, it is a portable jib crane with a base plate and wheels, the wheels are fixed when it is lifting and handling when it is moving, the lifting and handling work should be stopped, in other words, moving, stop lifting; lifting, stop moving; use wheels to instead of foundation, portable jib crane is in need by some special working condition;

So far, the max lifting capacity of stationary jib crane Yuantai can supply is 16ton, generally, the lifting height and arm length are not more than 6m, of course, Yuantai can customize the nonstandard jib crane according to different needs; while the max. The lifting capacity of a portable jib crane is 2 tons, and the lifting height and arm length are not more than 4m.

Advantages of Portable Jib Cranes/Mobile Jib Cranes

Here are the main advantages of portable and mobile jib cranes:

  1. Versatility and flexibility: Portable jib cranes and mobile jib cranes are used in a wide range of applications, such as construction sites, warehouses, machine shops and garages. Portable and mobile jib cranes can handle many lifting tasks, such as lifting materials, positioning equipment and performing maintenance work.
  2. Low Price: Portable jib cranes and mobile jib cranes use less material and are a more affordable option, especially for temporary lifting needs. The mobility of portable and mobile jib cranes is simple and easy to install, saving a lot of installation costs.
  3. Easy to use: Portable jib cranes are lightweight and can be assembled/disassembled quickly without the need for special tools. Mobile jib cranes have user-friendly controls for quick start-up operation.
  4. Space-Saving Design: Unlike overhead cranes, portable jib cranes and mobile jib cranes do not require large overhead clearance, making them suitable for areas with limited height.
  5. Safer: Portable jib cranes and mobile jib cranes are equipped with safety features such as overload protection and limit switches to prevent accidents and ensure safe operation.

The Two Main Categories of Workshop Jib Cranes

Jib cranes can be broadly categorized into two primary types: stationary jib cranes and portable jib cranes. Each category offers distinct benefits and caters to specific workshop needs.

1. Workshop Stationary Jib Cranes: A Permanent Lifting Solution

Workshop stationary jib cranes provide a permanent lifting solution, securely anchored to the floor or a wall. They are constructed from robust materials like steel and can support a wider range of weight capacities compared to portable models. Here’s a closer look at the different types of stationary jib cranes:

  • Freestanding Jib Cranes: These self-supporting cranes have a vertical column fixed to the floor, offering 360-degree manoeuvrability of the boom.
  • Wall-Mounted Jib Cranes: As the name suggests, wall-mounted jib cranes are affixed directly to a sturdy wall, ideal for maximizing floor space. They typically have a limited reach but are well-suited for repetitive lifting tasks close to a wall.
  • Mast-Mounted Jib Cranes: Designed for heavy-duty lifting, mast-mounted jib cranes feature a tall mast that supports the boom, providing a significant lifting height and outreach.

Choosing the Right Stationary Jib Crane:

Selecting a workshop stationary jib crane requires careful consideration of several factors:

  • Lifting Capacity: Determine the maximum weight you’ll need to lift regularly. Stationary jib cranes typically have higher capacities than portable models, ranging from a few hundred pounds to several tons.
  • Reach and Height: Evaluate the required horizontal reach and vertical height needed for lifting and manoeuvring materials within your workspace.
  • Work Area: Consider the available floor or wall space for installation and ensure the chosen jib crane’s boom movement doesn’t obstruct other equipment or workflows.
  • Duty Cycle: Select a jib crane that aligns with your workload demands. Light-duty cranes are suitable for occasional lifting tasks, while heavy-duty models are built for frequent, intensive use.

2. Portable Jib Cranes: A Flexible Lifting Option

Portable jib cranes offer a more flexible lifting solution. They are designed to be easily moved and positioned within your workshop or even transported to different work locations. Here are some common types of portable jib cranes:

  • Folding Jib Cranes: These cranes have a folding arm that can be collapsed for compact storage and transportation. They are a great option for occasional lifting needs.
  • Free-Standing Mobile Jib Cranes: Equipped with a wheeled base, these cranes provide excellent manoeuvrability within the workspace. They offer a good balance between portability and lifting capacity.
  • Forklift-Mounted Jib Cranes: These cranes attach to a forklift, transforming it into a mobile lifting unit. They are ideal for workshops that already utilize forklifts for material handling.

Choosing the Right Portable Jib Crane:

When selecting a portable jib crane for your workshop, consider the following factors:

  • Lifting Capacity: Portable jib cranes generally have lower capacities than stationary cranes, typically ranging from a few hundred pounds to a couple of thousand pounds.
  • Boom Length: Choose a boom length that offers sufficient reach for your lifting tasks while maintaining portability.
  • Maneuverability: Consider the type of base (wheeled, fixed) and its suitability for your workspace layout and desired mobility.
  • Ease of Use: Portable jib cranes should be easy to set up, operate, and move around.

Summarize the Factors to Consider Before Purchasing Jib Cranes

  1. Application Site: If floor space is limited, a wall-mounted or portable jib crane may be more suitable. For larger workshops, freestanding stationary cranes can provide greater positioning flexibility.
  2. Lifting Requirements: Calculate the weight, height, and reach required for regular lifting tasks. Choose a jib crane with a capacity that exceeds your maximum expected load.
  3. Frequency of use: For occasional lifting needs, a manual or low-capacity crane may be sufficient. For frequent or heavy lifting, consider an electric or higher-capacity crane.
  4. Portability Needs: If mobility is critical, a portable jib crane is the best choice. Choose the type that best suits your workspace and lifting tasks.
  5. Budget: Jib cranes come in various price ranges, depending on factors such as capacity, scope, features, and brand. Determine your budget ahead of time and choose a crane that provides the basic features you need without blowing your budget.
  6. Lifting mechanism: Jib cranes often work with a hoist, a lifting device similar to a Chain Hoist or a Wire Rope Hoist. Choose a hoist with compatible capacities and lifting heights to match your jib crane’s capabilities.
  7. Power source: Jib cranes can be manually or electrically operated. Manual cranes are suitable for lighter loads and less frequent use, while electric cranes offer greater efficiency and precision, especially for heavier loads or frequent lifting tasks.
  8. Safety Features: Always prioritize safety when using lifting equipment. Make sure the jib crane you choose complies with safety regulations and has features such as overload protection, limit switches and emergency stops.
  9. Maintenance needs: Regular maintenance is essential to ensure safe and reliable operation of jib cranes. Choose a crane with simple maintenance and easy-to-replace parts.

Come and Get a Free Inquiry

Our Yuantai Crane Company has been exporting bridge cranes, gantry cranes, jib cranes and electric hoists to the Philippines and other major Southeast Asian countries as well as countries around the world for more than ten years. We have very rich experience and a green manufacturing industry chain. contact us to get free crane solutions and quotations, and look forward to our friendly cooperation!

Gantry crane pulley wire rope connection

发表于由
回复

1) When intercepting the wire rope, tie the thin iron wires on both sides of the cut to prevent loosening, and the strapping length should not be less than 5 times the diameter of the wire rope.

2) When threading and winding the wire rope, the wire rope shall not form kinks, hard bends, flattened, shaved, etc. The coiled wire rope should be rolled or hoisted to make the wire rope level before being worn.

3) No matter what kind of fixing method is adopted for the wire rope, the rope end must be firmly fixed, and all fixed connecting bolts should be equipped with locking devices and reported to the technical inspection department for re-inspection.

4) When the pulley block is installed, check its flexibility of rotation, and there should be no jamming. The pulley that is not flexible should be disassembled and cleaned for inspection. If it is still inflexible, it should be adjusted and replaced.

5) The winding method of wire rope, pulley, drum, main and auxiliary hook connection should meet the requirements of the drawing.

 

 

Philippines 300T Overhead Crane for Steel Foundry Plant

发表于由
回复

On May 18th, the Capacity Upgrade Project of an Iron and Steel Company blast furnace was successfully ignited. The project entered the stage of full-line production, opening a new chapter in the optimization of the layout, transformation and upgrading of the iron and steel industry in Henan Province.

Yuantai made several capacity 300t overhead cranes for its steel foundry plant. These cranes are with four-girder four-track structure, which is for the task of foundry process transfer, converter charging, refining and molten steel receiving.

Features of Yuantai Foundry Cranes

1. Overall processing

The overall annealing and overall processing of the main hoisting frame ensure the installation accuracy of gears, bearings, motors, brakes, etc., with low noise, smoothness and no impact; the overall processing of the bridge frame ensures product wheel line accuracy and more stable operation.

2. Life service life

The detachable plate hook lining makes longer service life of the spreader.

3. Dual transformer mode

The transformer adopts the dual transformer mode of power transformer + auxiliary transformer.

4. Double Regulate

The whole crane is equipped with a backup redundant system. When a certain mechanism fails, the backup system can be quickly switched to ensure that the equipment does not stop and operates safely for 24 hours.

5. Safety projection warning

The system is equipped with a safety projection warning device, which can effectively remind ground personnel to perform safe operations when driving.

6. Safety management system

Analyze the crane’s operating status, working hours and usage times of wearing parts to facilitate equipment maintenance.

7. Multiple security protection

The boarding gate is equipped with a permanent magnet door switch, and a deceleration stop alarm system is designed in the corresponding operating mechanism.

8. Compact structure layout

The control system has a compact structure layout, which satisfies the application functions of short-span cranes.

 

 

What to pay attention to when installing the electric chain hoist?

发表于由
回复

First, First of all, the installation of the chain electric hoist needs to install the chain box first.

Second, connect the power cord.

When connecting the power cord, the power must be turned off beforehand. At the same time, the ground wire should be well grounded, otherwise the operator may feel the electric shock when touching the hoist or any part of the chain.

Third, to lubricate the load chain of the electric Chain Hoist
The degree of lubrication of the chain is an important factor affecting the service life of the load chain. Lubricate the load chain in a timely and effective manner to ensure the effective service life of the chain.

Fourth, check the arrangement of the chain

For multi-row chain electric hoists, make sure that the lower hook frame is not turned over. If flipped, return it to its normal state and make sure the solder joints of the chain are aligned. Never hang the load on a chain-wrapped hoist.Finally, check the working voltage
Since the electric chain hoist is shipped from the factory at a user-specified voltage or a higher voltage (for dual voltage only), such as 230/460V, check the wiring and confirm that the power supply voltage is met. If it does not, please refer to the instructions to correct it to meet the required operating voltage requirements.Tips: Install the electric chain hoist. If it is operated under improper voltage, it may cause serious damage to the electric chain hoist. In order to prevent this from happening, it must be ensured that the wiring meets the requirements of the required power supply.

 

What are the cranes suitable for workshop operation?

发表于由
回复

Lifting machinery is a kind of equipment which can carry on the movement of load from top to bottom and transverse direction and help to lift materials. It is widely used in various factory buildings. Because the space of the workshop is narrow and the structure of the workshop itself can be used as the scaffold of the crane, so the practical workshop crane is generally bridge crane, gantry crane and electric hoist, these lifting equipment are very suitable for the lifting operation of the workshop.

The bridge crane can traverse the lifting machinery above the workshop and can carry out load operation in the horizontal, vertical and horizontal directions to carry out the lifting of the materials. The overhead crane is also called a crane because its two ends are placed on the concrete beam or the metal beam of the factory building, and the whole machine is in midair.

The longitudinal rails are installed at both ends of the bridge crane to enable the crane to move longitudinally, so that the space under the bridge can be better utilized to lift heavy objects and avoid obstacles on the ground. Bridge cranes are the most widely used and largest lifting equipment on the market.

The gantry crane is improved on the basis of the bridge crane, and can be used in the material yard outside the factory to carry out loading and unloading of the cargo. The metal structure of the crane is similar to the door frame, and has a leg at each end of the main beam, which can perform load movement on the track on the ground, and the two ends of the main beam also have the function of extending the cantilever beam. Because of the advantages of site utilization, large operating radius and good versatility of gantry cranes, it has been widely used in some ports and factories.

This is the simplest lifting equipment. It can be used alone or in combination with doors and bridge cranes. It has the advantages of small size, light weight and use. It is common in industrial and mining enterprises, factory materials and other places.

 

European Double Girder Crane For Sale

发表于由
回复

Advantages of European Double Girder Crane

1. Compact design

The advanced design concept enables the European-style double beam crane to have a lightweight structure and excellent performance. At the same time, it reduces the operating limit distance of the hook to a certain extent, effectively improves the space utilization rate, and also enables customers to reduce plant investment costs. The use of Yuantai European-style double-beam crane will bring you a richer return on investment.

2. Fast and stable loading

The standard configuration of the double-beam European-style crane is that both the trolley and the large trolley are frequency-converted, which makes the driving run smoothly, and the positioning is fast, which effectively solves the sway of the reproduced object.

3. Safer and more reliable, with maintenance-free design

The European-style double-beam crane adopts advanced technology from the design and selection of materials to the manufacturing process, which shows its superiority especially during frequent operations. The perfect brake system greatly improves safety and reliability. The high-performance brake adopts dust-proof design, can be automatically adjusted, and has a safe service life of more than 1 million times. The moving gear is processed accurately, and the tooth surface is hardened and ground, which can ensure the long-term trouble-free operation of the European-style crane.

4. Better performance

As an important logistics equipment, European-style double-girder cranes can cause incalculable losses due to production shutdowns or malfunctions. European-style double girder cranes adhere to the consistent excellent quality of products and will be your high-quality choice in the logistics field.

Safety precautions for electrical equipment of double girder overhead cranes

The driving motor of the bridge crane completes the front and back, left and right, up and down movement of the hook through deceleration and transmission organization. In order to ensure the safety of the operation, the necessary electrical maintenance system should be set up, such as the main blocking switch, emergency power off switch, short circuit maintenance, Overload maintenance, limit maintenance, etc. It is necessary to regularly check the movement and heating of the motor and whether the electromagnet is operating normally.

Whether the controller and contactor are flexible and easy to use. It is necessary to: First, prevent out of control due to operating errors or electrical faults such as controllers and maintenance panels, resulting in heavy objects falling or hitting accidents; second, preventing electric shock caused by touching and exposing the power supply slide line or insulation damage or poor grounding Incident; third, in flammable and explosive places, it is necessary to use explosion-proof electric European Double Girder Overhead Cranes.

Safety precautions for the mechanical part of the overhead cranes

It is necessary to regularly check the parts of the overhead bridge crane to prevent accidents.

(1) Uneven wear of the pulley grooves will easily cause the wire rope pulley to contact evenly, and severe cases will cause operational problems; the pulley shaft wear overrun will easily cause the pulley shaft to break, and once the amount of wear exceeds the relevant regulations. The overhead crane necessary to replace it.

(2) If the reel is worn out or exhibits fatigue cracks, it is easy to cause damage to the reel; if the key is severely worn, it is easy to cause the key to fall off and cut, and the severe one is likely to cause heavy objects to fall. Should be replaced in this situation.

(3) The small shaft of the brake, the spindle, the brake wheel, the brake shoe material pad wear and overrun, and the fatigue crack of the tie rod and the spring may cause the brake to fail, and should be replaced.

More questions about the European overhead cranes, please contact me!

How to solve the jitter problem of electric hoist?

发表于由
回复

1. It may be caused by improper operation or illegal operation by the operator. For example, the sudden reverse operation of the electric hoist causes the motor to reverse, resulting in excessive impact torque.

2. It may be caused by the mismatch of the type of I-beam used. Under normal circumstances, monorail trains can be adjusted, and jitter can be reduced by tightening the width.

3. Is the lubricating oil of the electric hoist reducer reduced? Lubricating oil can be used.

4. If the chain jitters, it may be a problem with the brake, which is more likely to happen with a single brake.

5. When the electric hoist is just started or braked, it will produce movement inertia caused by jitter.

6. The braking mechanism of the electric hoist adjusts the inclination. During the braking process, the braking torque on both sides deviates, causing side torsion or vibration.

The of application of electric hoist

MD1 wire rope electric hoist has the characteristics of compact structure, light weight, safety and reliability.

Primary use: MD1 wire rope electric hoist can be installed on various cranes or suspended on I-beams, and can lift heavy objects in a straight line or a curve. The fixed Wire Rope Hoist can be installed on a fixed bracket for vertical or different angle hoisting. MD1 electric wire rope hoist is widely used in the working conditions of enterprises, railways, wharfs, warehouses, yards and other places. It is an indispensable machine for improving working conditions and improving labor efficiency.

The wire rope hoist is a kind of electric hoist with large market demand, and it is a well-known product in the electric hoist. MD1 electric wire rope hoist is a commonly used electric wire rope hoist. The MD1 electric wire rope hoist has some vulnerable parts, which are prone to problems during use.

The main wearing parts of MD1 electric hoist include rope guide, sealing ring, brake ring, high-speed pinion at the shaft end of the rotating motor, etc. These parts are easily damaged during normal use. These wearing parts are not covered by the warranty and belong to normal wear and tear.

Vulnerable parts should be checked daily and replaced in time to avoid more serious problems. Many machines have wearing parts, but this does not mean that these wearing parts can be replaced with inferior quality. The wearing parts of Dongqi MD1 electric hoist are of excellent quality. Even so, their “vulnerable physique” cannot be changed, and it can only be said that they can properly extend their lifespan.

10 Ton Overhead Crane Hot Sale in the Philippines

发表于由
回复

10 Ton overhead crane for Sale in Philippines

Overhead crane, commonly called a bridge crane, eot crane, is a type of crane found in industrial environments. An overhead crane comprises parallel runways with a travelling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. Usually, there are many kinds of types of cranes, firstly they are divided into single girder and double girder overhead cranes.  There are included normal type, European type, magnetic crane, grab crane, explosion proof crane, and so on. According to the different environments and different applications. We will choose the most suitable crane for the customer.

10 ton Overhead crane perfectly helps us lift heavy loads, which can meet 1-500 ton materials handling needs, with the development of the economy, overhead bridge cranes have become more and more popular in the Philippines. Almost all kinds of heavy industries need to install overhead bridge cranes to finish production. For example, Machinery production workshops, steel handling workshops, automobile industry, food processing, steel production, paper mills, electromagnetic board factories, casting industry, etc.

10 Ton Overhead Crane for Sale Design

Capacityt3510162025
SpanS(m)7.5~31.57.5~31.57.5~31.57.5~31.57.5~31.57.5~25.5
Lifting heightm6~306~309~309~309~309~30
Lifting speedm/min8（0.8/8）8（0.8/8）7（0.7/7）3.5（0.35/3.5）3.3（0.33/3.3）3（0.3/3）
Trolley speedm/min20(30)20(30)20(30)181416
Crane speedm/min20(30)20(30)20(30)20(30)20(30)20(30)
Work duty A3~A4A3~A4A3~A4A3~A4A3~A4A3~A4

10 Ton Double Girder Overhead Crane Hot Sale in Philippines

Double girder overhead crane is designed to move, lift or transport heavy materials, widely used for transferring heavy goods in factory, warehouse, workshop, processing plant, shipyard, and so on. 10-1200ton overhead crane we can provide as your detailed needs.

Get A Free Quote

Interested in our overhead cranes, or want to get the latest price? Simply email us or give us a call to let us know the basic information about the crane you need:

    • Maximum rated load
    • Span of the crane
    • Lifting height
    • Type of load or material
    • Crane working environment
    • How many hours does the crane work per day?
    • How many meters does the crane travel?
    • Other special requirements