Overhead Crane: Garbage crane for wastes management

发表于由
回复

The overhead crane for garbage disposal is with a garbage grab, which is import equipment in city waste incineration plant. Overhead crane for garbage disposal is installed over the garbage pit for garbage charging, transport, mixing and weighing. This garbage disposal grab crane can be manual, semi-auto and fully auto type, carrying out automatic grabbing, automatic repeat feeding, automatic repeat dumping, and automatic parking.

Due to the high working level of the garbage grab crane and the characteristics of the crane itself, it brings great challenges to the stable operation of the system. Our company has developed a new product through the accumulation of work in the lifting industry and summarizing the operation characteristics of the garbage grab. A set of frequency conversion speed regulation control method specially designed for garbage grab crane is proposed, so that the crane can run stably.

The crane handling system composed of two garbage grab cranes (one working and one standby) is used to complete the work of garbage feeding, stacking, mixing, moving and breaking of waste in the waste incineration power plant. Each crane has its own independent electrical control system, operation console and HMI display panel, and manual and semi-automatic control systems can be provided according to the needs of users. Hand, automatic switching is convenient and quick.

Manual Type:

Operator controls the crane with the linkage console.

Semi-Auto Type:

The grab operation is manual control, and the auto-controlled part includes the moving to charging port, weighing and charging.

Fully-Auto Type:

Once the crane receiving the charging signal from the charge port, the crane starts to do every move automatically, moving to the garbage, lower the grab, grabbing the waste, lifting the waste, moving to the charging port, weighing, charging, and returning the position. It will repeat the same motion automatically.

Basic Operation:

1. Feeding. Grab and feed Fermented garbage into waste incinerator.

2. Lifting and transport. Lift and transport the waste near the discharge door to avoid blocking the discharge door. Control the quantity of garbage in the waste pit to keep the inventory within 3~5d.

3. Mixing. Mix the garbage to extract water content and shorten the fermentation time, as well as keep safe of incineration.

4. Fetching. Fetch non-flammable objects in the pit.

5. Weighing. Weigh the garbage before being dump into the incinerator.

 

Wire rope hoist: 40 ton wire rope hoist for sale Philippines

发表于由
回复

As an electric hoist manufacturer and supplier in China, Dongqi Hoist and Crane is able to provide various of Wire Rope Hoists, such as, Metallurgical Electric Hoist rope hoist, explosion proof wire rope host, FEM wire rope hoist, and small rope hoist or mini wire rope hoist, etc.

Electric hoist is a kind of special lifting equipment. Electric hoist has the characteristics of small size, light weight, simple operation and convenient use. It is used in industrial and mining enterprises, storage, docks and other places, so it is widely welcomed by the Philippine market.

40-ton Wire rope hoist Philippines main parameters:

  • Product Type MD1
  • Wire Rope Electric Hoist Lifting Capacity: 0.5~32t
  • Wire Rope Electric Hoist Lifting Height: 6~50m
  • Wire Rope Electric Hoist Working Class: M3, M4
  • Wire Rope Electric Hoist Ambient Temperature: -25~40℃
  • Application of wire rope hoist: It is installed on overhead crane, gantry crane, and jib crane for material handling wit high requirement to precision.

Wire rope hoist for Philippines pictures

10 ton double girder crane for steel coil handling Vietnam

发表于由
回复

Steel coil plant is one of the most common factories in Vietnam’s steel industry. Proudly, Dongqi Crane has the chance to do contribution to make the steel coil production work more efficiency. The most suitable coil handling crane is double girder overhead crane. Having served lots of steel factories, Dongqi Hoist and crane has served many steel mills around the world and has rich experience and can provide the best crane products and services for your factory or workshop. Now, we will cite a case of Dongqi hoist and Crane for your reference.

Vietnam Steel Coil Crane Requirements

The Vietnam coil plant needs a set of double girder crane to lift the standard sized steel coils, which cannot be held by Crane Hook only and the special lifting slings are needed. Most of the steel coils are final products, packed with delicate packages which needs to be handled tenderly with no rudeness. What’s more, the Bangladesh client wants the double girder crane can perform almost 24 hours duty a day. Lastly and most importantly, the crane price must be cost-effective, durable quality with low price.

According to the client requirements and the factory conditions, Dongqi Hoist and Crane designs 1 set of 10-ton double girder overhead crane for the Vietnam steel plant. The material handling solution of Dongqi Hoist and Crane has the following advantages:

  • Dongqi Hoist and Crane uses Schneider electricals which is more suitable and cost-effective.
  • Equipped with frequency converter which could adjust its speed in order to make the crane traveling more smoothly and steady.
  • Dongqi Hoist and Crane fully meets client’s requirements and improves their working efficiency.
  • Less maintenance also saves much time and cost which satisfied client.

Features of Double Girder Hoist Overhead Crane

  • Lifting capacity: 1t~32t
  • Crane span: 7.5m~28,5m
  • Lifting height: according to client’s requirements
  • Voltage: 380V 50Hz 3Phase (according to customers’ needs)
  • Working class: A3, A4, A5
  • Working environment: -20 degrees~40 degrees

 

3 Ton Hoist Crane Sale for Coffee Mix factory Philippines

发表于由
回复

Recently we received an inquiry : “Our coffee mix factory Kopiko Philippines Corporation (Calamba, Laguna)  need hoist crane for our coffee mix production Line.”

As soon as we receive the inquiry, we immediately reply to the customer’s email to confirm which type of hoist crane the customer wants. And he wants to use for coffee mix production Line. Our engineers designed a 3-ton double-girder crane according to the customer’s plant structure and work requirements. (3 tons capacity, Lifting height 8M, Span 15M, Runway length 79M).

overhead crane Supplier in Philippines

Before our top running overhead cranes were installed, a Pillar Jib Crane served the two work stations. The toolmakers frequently had their work interrupted while awaiting the availability of the jib crane. It was therefore decided to make each station autonomous with its own overhead crane of a lifting capacity of 3 tonnes. The 3ton overhead cranes travel on the same steel structure and to avoid accidental collisions, limit switches guarantee travel safety.

After repeated communication to confirm the details, while giving our professional crane knowledge, we also established a trusting relationship with our customers, so they naturally called on us to help reorganize their mold routine maintenance workshop. We successfully signed the contract for the hoist crane.

Overhead Crane Supplier in Philippines:

In order to give a suitable overhead crane solution and specific overhead crane price promptly for our clients in Philippines, please help to confirm the following information as much as possible:

  • Types of overhead crane : (Single or double girder? European type or Common one? )
  • Capacity:
  • Span:
  • Height of Lift:
  • Power supply: (3phase? Voltage? Hz?)
  • Bay/ Travelling Length:
  • Quantity:
  • Operation: Through Pendant/Radio Remote/Cabin Control
  • Indoor/Outdoor:
  • Application (What are you planning to lift) :
  • Environment (Normal/ hazardous) :
  • Building drawing if possible:
  • Location:
  • Industry type: (Eg: Auto, steel, sugar, stone, etc)
  • Rail Existing/New: (Size in case of Existing)
  • Number of Cranes in bay:
  • Existing Structure/New Structure:
  • Your full company address and contact details:

If you do not know about how to select the overhead crane Philippines, please feel free to contact us. The reply will be given within 24 hours. Get your custom design overhead crane today.

5 Ton Overhead Crane Sale for Vietnam Wood Mill

发表于由
回复

Recently we received a message on our website: 2 set of overhead crane 3 ton for lifting wood, the customer from Vietnam. As we know, Vietnam is located at the southeastern tip of the Indochina Peninsula in Southeast Asia , and Vietnam is rich in Rich in natural resources and developed wood industry.

We confirm the details with Vietnam customer, and he want the overhead crane in his mill and grab bales of wood, so our engineer advised him 5 ton double Girder Grab Bucket Overhead Crane and finally we received the contract from customer.

Specifications of 5 ton double Girder Grab Bucket Overhead Crane

  • Lifting capacity:5t, 10t, 16t, 20t
  • Lifting height: 26m
  • Span: 10.5~31.5m
  • Working duty: A6
  • Working temperature: -20 centigrade~40 centigrade
  • Voltage:: 3-phase AC, 380V 50Hz

It is prohibited to use the equipment in the combustible, explosive or corrosives environment.

Double Beam Overhead Crane-double girder grab bucket overhead crane 

  • Widely used in loading goods in port, factory, work shop and power plant.
  • It is an ideal tool in handling bulk cargo such as coal, ore powder, fertilizer and sand
  • The users can configure cane grab, waste grab, wood grab and others according their needs.

We can design and manufacture special products under the requirements of users. Any inquiry about overhead cranes, feel free to contact us!

 

Vietnam 1 Ton Overhead Crane for Light Duty Material Handling

发表于由
回复

1 ton overhead crane is the small lifting crane which has an extremely small size and light weight. Besides, it has a very compact structure and good design, it is convenient and easy to install, operate, and maintain. So 1 ton overhead crane is hot sale in Vietnam market.

Vietnam is rich in mineral resources, but affected by terrain, the distribution is not concentrated, so small types cranes are widely welcomed in the Vietnamese market, among which the 1-ton bridge crane.

1 ton bridge crane is commonly used for light duty service, usually used in the small warehouses, workshops, garages, assembly factories, and many other places.

Last month, we received an inquiry from a Vietnamese customer about bridge cranes. The customer is doing mining business in southern Vietnam, and the equipment required is relatively small. According to the drawings sent by the customer, our design department recommended a 1-ton double girder overhead crane. , After the customer received the drawing, he was very satisfied and sent an offer soon. We immediately placed the order of overhead crane for production after receiving the payment, and look forward to delivery!

Choose 1 ton overhead cranes for light duty material handling:

You’ll be able to increase productivity, transport items, and things more quickly across your business, and enjoy a variety of other advantages with 1 ton overhead crane, including:

  • Lightweight, small size, portable and travelling.
  • Stable performance, high efficiency, less maintenance.
  • Advanced technology, durable material, long service life.
  • Good design, simple structure, elegant appearance.
  • Full Remote Control and manual operation choices.
  • Smooth starting and ending.
  • The reliable safety protection devices, such as overload limiters, limit switch, etc.
  • Famous brand, international company, competitive quality.

 

Floor Mounted Jib Cranes – Customize Crane Solutions

发表于由
回复

Floor-mounted jib cranes are lightweight, have a twist-free steel girder construction with low headroom. Available in steel, aluminum, and stainless steel. Capacities from 2 tons. Floor jib cranes are versatile pieces of material handling equipment, and they’re often the best solution for applications within a small area.

Something Should To Know Before Buying a Floor Mounted Jib Crane

Floor Mounted Jib Cranes have a heavy wall structural steel pipe mast and a reinforced large diameter base plate for minimal deflection and continuous alignment. Durable and long lasting overhead floor cranes feature a rolled steel I-beam section with tapered flange for smooth trolley travel. Safety end stops at both ends of boom limit trolley travel. Floor cranes bolt to concrete foundations.

  •  Additional features and benefits include:
  • Capacity up to 5 Tons
  • Heights & spans to 25’
  • I Beam Construction
  • Heavy duty gusset & base plate
  • Rigid box type head section
  • Adjustable Lower roller cage

Last month DQCRANES supplied 500kg jib cranes along with electric chain hoists to a customer working in the logistic sector in Vietnam. This floor jib crane is used for pull out & mobilization of compressors/machines under repair.

Design & Build

· The customer application was outdoors and therefor the crane was hot dip galvanized to provide longevity when installed outdoors whilst the hoists were supplied with weather protection jackets and IP65 pendant controls to avoid water ingress.

· With a 500kg capacity, a height of 5.5m and an arm length of 5m, there is not much close by that these cranes would not reach.

 

Indonesia EOT Cranes | Electric overhead traveling crane

发表于由
回复

EOT crane, also known as electric overhead travelling crane, is one of the most commonly used types of lifting equipment in workshops, warehouses, storage yards of various industries. Due to its unique structure, the eot crane gained a big market in Indonesia and the overhead crane can make full use of the space under the bridge to lift materials from the ground without hindrance.

Our overhead EOT crane comes in two main configurations: single girder and double girder, both are very popular in Indonesia, and now the details as following:

Single girder Eot Crane For Indonesia:

Model AQ-LD
Load capacity 1-25t
Span 7.5-31.5m
Lifting height 6-30m
Lifting speed 0.3-8m/min
Hoist running speed 20m/min
Crane running speed 20m/min
Work duty A3, A4

Features Of Single Girder EOT Overhead Crane

  • Simple structure
  • Low operating cost
  • Easy to install and maintain
  • Ideal for light duty to moderate service

Double Girder EOT Crane For Indonesia

Model AQ-QD
Load capacity 5-450t
Span 10.5-31.5m
Lifting height 6-24m
Lifting speed 2.1-11.5m/min
Trolley running speed 27-40m/min
Crane running speed 42-75m/min
Work duty A3-A7

Features Of Double Girder EOT Crane

  • High work efficiency
  • Better hook height
  • Greater span and load capacity
  • Ideal for heavy duty applications

EOT cranes are widely used in machinery processing, metallurgy, petroleum and petrochemical, papermaking, building materials, chemicals, power stations and other industries in Indonesia.

According to different crane lifting attachments, overhead cranes can be used in different workplaces to handle various loads or materials.

Overhead Crane Supplier Philippines –10 Ton Single Overhead Crane

发表于由
回复

Last month, our overhead crane engineering team has finished installation for our clients, our Philippines clients ordered 10 ton European type Single Girder Overhead Crane.

Overhead crane Philippines

Details Parametes of 10 ton European Type Single Girder Overhead Crane
lifting capacity: 10ton,
Span: 10m
Lifting height: 6.2m
Girder type: European standard single girder,
Application: used in warehouse for material handling

Now, the single-girder overhead crane has been installed and put into use. Our customer commented: “This equipment runs very smoothly, efficiently, and is easy to operate. It greatly improves our production efficiency. I am very satisfied with DQCRANES’s services and products. I hope we can cooperate for a long time in the future.”

The ever-increasing needs of customers are the driving force behind our progress, and a good reputation trumps all advertising. Based on our knowledge and experience in the lifting equipment market, as the overhead crane supplier, DQCRANES always provides customers with efficient, safe and cost-effective lifting solutions and equipment, and accompanies customers to develop together.

For more information about our overhead cranes or other industrial lifting solutions, please contact us or request a quote.

15 Ton Overhead Crane for Power Plant Maintenance in Philippines

发表于由
回复

In Feb, 2022, we received an inquiry for 15 ton overhead bridge crane from a power plant in Philippines, which provides power plant modernization, gas and combined cycle power plants, and engineering and control systems. For a highly efficient and environmentally friendly energy supply, they need overhead bridge cranes to help generator set installation and maintenance, electrical equipment and other items lifting and handling.

According to the real requirement and plant dimension, we recommended 15 ton Single Girder Overhead Crane to them. The client asked us to provide reference list for their checking of our cranes quality in local, this is a good chance to increase mutual understandings and trust, after visiting and confirmation, they were very satisfied.

Our sales and technical department provided professional design drawings and detailed technical data for the client, he was very satisfied. Two weeks later we received purchase order. The 15 ton bridge crane has been tested and safely packaged before leaving our factory and is ready to Philippines.

How to Quick Get the Price of overhead crane?

  • Lifting capacity: _ton?
  • Lifting height: _m?
  • Span: _m?
  • Hoist type: A. Electric Chain Hoist Electric Wire Rope HoistC. Manual chain hoist
  • Control Mode: A. Remote Control B. Pendant Control
  • What material will the crane lift?
  • Transportation: tell us the sea port name near you, we can quote you shipping freight.