With the continuous development of the economic, construction industry factory emerge in large number, Yuantai crane overhead crane are also increasing, The following is a real shot from the customer site. Our clients bought two sets 10 ton overhead crane for moving marble, lifting stones, and handling stones,etc. It is features of high efficiency, precision, safety, stable, save labor costs.
Specific Parameters of Marble Handling Overhead Crane In Nigeria
Products Details:
Capacity: 10 ton
Span: 5m ~ 20m
Lift Height: 3m ~ 15m
Work Duty: A4
Customer’s Initial Inquiry Content:
I am looking for overhead crane for marble factory to load/unload max 10 ton quarry/rocks, please make an offer for suitable equipment.
Customization:
When asking for a quote, please give us the following information:
Load capacity?
Span? lifting height?
power voltage?
cantilever length?
With the parameters,we can give you precision offer for your need, if you have any doubt on it, please contact us directly online.
Different industries require unique overhead crane tailored for their lifting solutions, Aicrane customize 1-500 ton overhead crane for your lifting needs, Above is 30 ton NLH European standard electric overhead travelling crane we designed for our client in Nigeria: our client need a 30 ton bridge crane to help lift heavy materials, Why do we recommend European type overhead cranes?
1. Light weight, compact structure, reliable performance;
2. Simple to install & operate, save cost & time;
3. Improve the space utilization rate of the plant and increase work efficiency;
4. Higher protection level, Motor protection class is IP54;
5. High-quality & high-performance parts reduces the maintenance and repair workload;
6. Smooth start, run and stop, more safety & precise;
gantry crane is widely used for factory or outdoor place to load, unloading and transport heavy materials, such as steel plate, pig iron, merchant steel, etc. 60ton european doble girder gantry crane has installed in Malysia, it is used outdoor for lifting and transporting materials.
As a top heavy crane manufacturer, we have more than ten series products: overhead crane, gantry crane, hoist, winch, mobile boat hoist, RTG crane, etc. meeting all kinds of material handling requirements of various industries. Aimix is committed to providing best customized crane services to each of our clients with high technology and economic index. welcome to contact us for crane design.
Yuantai crane 5 ton explosion proof hoist was shipped to Thailand. The Explosion Proof Electric Hoist is used in the production workshop, and the lifting height is 34m. Since the customer’s production workshop is in a flammable and explosive environment, there are certain requirements for the explosion-proof grade of the hoist. Through our patient communication and understanding with the Thai customer, we recommend him to use our explosion-proof Wire Rope Hoist.
Characteristics Of The Explosion Proof electric hoist Thailand
The hoist complies with the regulations of JB/T10222-2001 “Explosion-proof Wire Rope Electric Hoist”, and the explosion-proof grades are ExdⅡBT4 and ExdⅡCT4 respectively.
The explosion-proof wire rope hoist can be used alone with the fixed suspension track in the workshop, and can also be used together with the AQ-LXB explosion-proof suspension Single Girder Overhead Crane, the AQ-LB explosion-proof single girder overhead crane, and the explosion-proof hoist double beam overhead crane.
The explosion proof electric hoist is suitable for the explosive gas environment formed by combustible gas, steam and air with explosion-proof level not higher than B or C level and ignition temperature group not lower than T4 (135℃) group in the factory.
Technical Parameters Of Explosion Proof Hoist For Your Reference
Looking for the latest prices on electric hoists to Thailand? Contact Yuantai crane! We have a professional engineer team to help you select the most suitable hoist for your applications and offer you the price to ship to Thailand.
2 ton electric hoist was about to be shipped to Cambodia. In addition, we also supplied end beams for the Cambodia customer. This Cambodia customer needs a single-girder overhead crane to lift heavy objects in his facility. He googled and entered our website and found the exact overhead crane product he needed, so he sent us an email asking for a price. Our sales staff contacted the customer shortly after receiving this inquiry, confirmed the needs with him and provided the right lifting solutions and quotations.
Details Of 2 Ton Electric Hoist Cambodia
The Kenyan customer’s facility needs to install a Single Girder Overhead Crane to lift heavy objects with a lifting capacity of 2 tons and a lifting height of 6m. After full communication with the customer, we provided him with different overhead crane solutions. Considering the transportation and budget, the customer finally decided to make the main beam locally, and wanted us to provide European type electric hoist 2 ton, including the power supply system, and the end beams.
Now, the European-style 2 ton electric hoist and end beams have been well packaged and will soon reach the customer’s destination.
Advantages Of Cambodia European Type 2 Ton Electric Hoist
1. High efficiency – the European-style electric hoist has two-speed hoisting, which improves the working efficiency; the frequency conversion operation reduces the load jitter, and the positioning is accurate.
2. Light weight and compact structure – all parts of the European standard electric Wire Rope Hoist are of high quality, and the production process is also the most advanced, ensuring high performance, light weight, compact structure, expanded operating range and high utilization rate.
3. Reliable and durable – the accessories including motors, reducers, drums, wire ropes and electrical devices are of high quality.
4. Low failure rate – the European-style electric wire rope hoist comes with multiple safety protection functions to ensure the low-failure operation.
contact us For The Right Lifting Equipment Cambodia
Aicrane is committed to providing Cambodia customers with the most cost-effective lifting solutions. According to the customer’s lifting needs, working conditions and budget, we can recommend different types of lifting equipment for customers, including overhead cranes Cambodia, gantry cranes, jib cranes, electric hoists, winches, etc.
Contact us today to get the right lifting equipment in Cambodia!
Congratulations to Yuantai 45 ton metallurgical overhead crane delivered to Vietnam! This overhead crane which will be used in the client’s steel mill to lift and move hot molten metal.
The metallurgical casting overhead crane is one of the main production equipments in the smelting workshop. The foundry crane is equipped with independent driving main and auxiliary trolleys. The main trolley is equipped with gantry hooks with fixed spacing to hoist the steel drums, and the auxiliary trolley can be used to turn the ladle or do other auxiliary lifting operations.
In the converter workshop, the casting overhead crane is used to pour the molten iron transported from the blast furnace workshop into the mixing furnace and directly pour the molten iron in the mixing furnace or the molten iron transported from the blast furnace workshop into the converter.
In the converter or open hearth workshop, the metallurgical overhead crane continuously casts molten steel in the steelmaking furnace or casts steel ingots.
Technical Parameters Of Metallurgical Casting Crane
While growing at a continuous production and the volume of steel they moved on a daily basis. With the volume increase, their fleet of trucks were transporting and delivering stock non-stop, and their bridge crane application cycles increased significantly due to constant loading and unloading.
Our client needed an effective solution to ensure they had the most reliable bridge cranes that would help them avoid any downtime and handle a high-demand operating environment. After comparing the design scheme of traditional bridge crane and European bridge crane, they prefer European one.But how to maintain the bridge crane?
An overhead crane is a type of equipment that consists of two parallel beams. These beams are used to transport cargo from one place to another inside a factory. These cranes are extensively used in maintaining various applications such as warehouses, workstations, garage workshops, etc. The two beams of the crane used to support it in moving the load either side to side or forward & backwards.
Hoist crane safety and precautions:
Before operating an overhead crane, a person should have adequate knowledge about the important tips and tricks. Before starting the safety inspection, an operator should thoroughly check the below-mentioned potential safety hazards.
An overhead crane should be operated with skilful, experienced and trained employees. People who don’t have adequate knowledge about the crane should stay away from operating a crane. Because any small mistake can lead up to the losing lives of people.
You should consider the crane loading condition to avoid a load moment. This can overturn the crane.
“Hoist danger” signs should be placed around the operational area. No worker and staff should stand or work beneath the hoist area.
While operating an overhead crane, proper cautions and measures of safety length of people should be maintained.
You should opt for a professional inspection of the load/stress-bearing structure at least annually. Also, submit the reports for the crane file.
When a hoist or overhead trolly is travelling, don’t swing a crane or grab or hook.
When the crane is in the operating phase, select those items on the crane that could potentially fall.
The crane with the operator cabin should possess a fully-charged fire extinguisher.
Check the bridge and trolley whether they are on track and functioning properly or not.
Make sure that the load can travel without inhibitions.
Never leave the load ignored.
Before using, check the hook roller brackets, welds, locking devices, bearings, pins, shafts, gears, and removable outrigger attachment.
Before starting check all brakes (the bridge and trolley motor brakes).
Don’t forget to check the main chords and lacings.
Check whether the bridge and trolley motor brakes are functioning properly or not. Do cross-check if all the below-the-hook devices are in good condition or not.
Test proper calibration on all indicators.
The correct response of brakes, motion lever, and locking devices must be checked. Never ignore the accuracy of the rated capacity indicator (RCI) or load moment indicator (LMI).
You should inspect the crane periodically. This includes loose, missing bolts, pins or nuts, cracked, worn or distorted parts.
Pay extra care and attention to the hook block. This will help you to get an idea of whether the wire rope and load chain are in the right positions or not. If they are not in the proper positions, fix their positions immediately.
When the crane is in motion, the operator should be attentive.
Always ensure that there is no kinking, cutting, crushing, un-stranding or thermal damage to the wire rope. Check whether all chain sprockets are operating effortlessly or not.
The safety should be checked or inspected by professionals who have in-depth knowledge regarding this field.
Looking for a professional and reliable material handling solution that exceeds your expectations? Contact us and request a quote!
Crane is a kind of large lifting equipment. In the operation of the project, once a problem occurs, it will not only hinder the smooth progress of the work, but also endanger the life and safety of personnel. Therefore, it is necessary to check all components before putting the vehicle into operation to ensure that everything is safe and reliable. The pre-use inspection mainly includes the following aspects.
1. Each cylinder of the engine has a large mass high-speed reciprocating motion, and its dynamic performance is very complicated. Therefore, the inspection is mainly carried out through the power of the engine and the oil. Select the no-load power measurement method to determine the value of the inertia coefficient. Measuring the average acceleration and acceleration of the engine within the specified speed range or measuring the instantaneous acceleration at a certain speed can judge whether the oil is normal or not according to the wear condition.
2. Generally, hydraulic transmission is used for the experiment of the hydraulic system of the crane. Before checking the hydraulic system, check the oil level of the hydraulic oil tank and the deposits on the bottom of the oil tank. After measuring the oil temperature, oil pressure and flow of the hydraulic system to determine whether there is a problem.
3. Crane steel structure experiment The steel structure here mainly refers to the boom. Mainly check the flatness of the boom cover and the web; the parallelism between the upper and lower cover and the two webs; the straightness of the upper web and the lower cover of any section. Through these data, we can see whether the boom is deformed, whether the strength and the hill are reliable
Driving inspection, the wire rope directly touches the suspended object. Therefore, it is necessary to ens
The electric hoist can be installed on the I-beam rail under the main beam of the single girder crane and run left and right as the lifting mechanism of the single girder crane, so the single girder crane can also be called the electric hoist single girder crane. The single beam crane has been used for a long time, and the electric hoist may have some problems, such as failure to descend normally. What should we do at this time? I would like to share the reasons why the electric hoist can not fall normally and the solutions.
The failure of the electric hoist to descend normally poses a great threat to the operators and will also cause economic losses to everyone. Let’s see what causes the electric hoist to fail to descend.
1) The brake pads are too tight
First of all, after wear and use, the brake pads will only become looser and looser, and will never become tighter and tighter. It is possible that after maintenance and adjustment of the brake pads, we directly carried out the operation without testing. The distance between brake pads is abnormal.
2) Fatigue operation of internal parts of electric hoist
The internal parts are heated during continuous operation. Affected by other parts, other parts may fail.
3) Transmission parts of electric hoist are blocked
It is also possible that there is a big problem with the transmission part of the electric hoist itself, which is directly stuck there when descending.
4) The electric hoist is operated at high temperatures or high load
High load operation of electric hoist will make the brake pads loosen and tighten with high strength. Fatigue of the brake pads may lead to direct locking of the electric hoist.
Electric hoist single beam crane is a low working level lifting equipment. If the working intensity is too high, it may have a certain impact on the life of the hoist and speed up the damage of the equipment. When the electric hoist fails to descend normally, first find out the cause of the problem, and then formulate solutions according to the cause.
Adjusting brake pads
Reduce work intensity
Repair the transmission parts of the electric hoist
It is common for mechanical equipment to fail. If maintenance can be done well during normal use, the probability of equipment failure can be greatly reduced.
