The kbk crane can complete the arduous overhead lifting task, and can undertake frequent overhead material conveying operations; it can be installed on any general 15cm thick reinforced concrete ground without putting pressure on the roof structure of the building, using prefabricated standard molds The organized planning structure can be easily expanded with the expansion of the operation cell center. Installation method of steel structure/steel frame of kbk flexible crane
Take two 20# I-beams with a length of 4.5 meters and connect them with two φ79*4.5 seamless steel pipes with a length of 3 meters. Pay attention to the horizontality and verticality when connecting. Two electric chain hoists are hung on the main beam of the steel structure of the workshop, and the assembled electric Chain Hoist is used to lift the above assembled steel structure to the side of the main beam, and fix them firmly with bolts. Assemble and install the remaining 4 identical steel structures to the main beam.
Lay 4 sleepers on the ground with the same height, and then put two I-beams with a length of 8 meters on the top to assemble them. When assembling, pay attention to the flatness of the interface, and then weld them. Use the same method to team up the remaining two I-beams.
Then adjust the position of the electric hoist, use the electric hoist to lift the two I-beams that have been aligned to the steel structure just hanged, and use the pressure plate and bolts to fix it firmly.
Check all bolted joints and tighten them again to ensure their pre-tightening force.
Install the upper suspension on the rail-bearing beam and the suspension clip on the track, and place the two ball-strand long nuts in the ball sockets of the upper suspension and the suspension clip respectively. All connecting bolts must be tightened to the specified torque.
Screw the threaded suspension rods into the two ball-stretched long nuts of the upper suspension and rail suspension clamps respectively, until the spring clamp can pass through the long hole of the ball-stranded long nut and the lateral hole of the threaded suspension rod, according to the specified torque. Tighten the bolts on the suspension clamps to suspend the light rail.
Scope of application of KBK flexible crane
KBK flexible cranes include KBK-D monorail crane, KBK-LD single beam crane, KBK-LS double beam crane, KBK-LSS telescopic crane, KBK-LM stacker and so on. It has a wide range of applications, especially on modern production and transport lines.
The customer’s doubts: Can it only lift up to 2000kg?
Answer: Yes, because the KBK flexible crane is a light and small crane, the current maximum lifting weight is 2000kg. If your product exceeds 2000kg, contact Yuantai Crane and choose other lifting equipment. Good reliability and stability
The components of the KBK flexible crane system are all standard modules, which ensure high-volume, high-quality production, so the system is very reliable.
The main body of the system module is three kinds of high-strength, rigid and light-duty cold-rolled steel, which ensure the stability of the system. The KBK flexible crane system can be flexibly designed and installed according to the needs of each station in the factory.
The automatic transmission line can be assembled arbitrarily from fixed point to high precision, multi-point and multi-point. It can be used for retrofit and expansion of newly designed plants or systems. Easy and cost-effective installation
The installation and commissioning of the KBK combined crane system is very convenient. KBK steel and standard modules can only be used by bolting, which saves space and area of the factory, reduces energy consumption, and improves business efficiency. The system can be operated manually, automatically or semi-automatically with high efficiency.
