The service life of the wire rope has a great relationship with the method of use. Therefore, it should be used according to regulations, dragging and throwing are prohibited, overloading is not allowed during use, the wire rope is not allowed to bend at an acute angle, and the lifting speed is not allowed to change sharply. , Avoid shock load. 2. When the wire rope has rust and dust, use a wire brush to remove it and apply oil.
Oiling the steel wire rope every 4 months. It is best to soak the core of the rope with hot oil (about 50℃) and wipe off the excess grease.
After the wire rope is coiled, it should be placed in a clean and dry place, and should not be stacked to prevent sprains.
The end of the steel wire rope should be tied up with a steel wire or welded with a low melting point alloy. It can also be fastened with an iron hoop to avoid loosening the rope head.
During use, if oil droplets are squeezed out on the surface of the wire rope, it means that the wire rope has been subjected to considerable strength. At this time, the load should be stopped and the inspection should be carried out. If necessary, replace with a new wire rope.